News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

1971-74 Charger Rear Quarter Chrome Reveal Molding Screws

Started by CDN72SE, September 29, 2017, 11:10:59 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

CDN72SE

September 29, 2017, 11:10:59 AM
Slowly re-assembling the car and I am adding these moldings front & back. Any idea what type of screws were used?



1972 Charger SE

randy73

#1
September 29, 2017, 01:53:30 PM
Mine is still on my car, so I will take a pic for you.

CDN72SE

#2
September 29, 2017, 02:16:17 PM
Much appreciated, thanks Randy.
1972 Charger SE

Simonic

#3
September 29, 2017, 03:46:55 PM
Looks like a really nice job you are doing there  :2thumbs:
Mopar owner in the UK..

CDN72SE

#4
September 29, 2017, 03:48:27 PM
Thank you Simonic much appreciated.
1972 Charger SE

CDN72SE

#5
September 29, 2017, 09:05:43 PM
For the two screws that go into the quarter end cap I used two wheel opening moulding screws.
1972 Charger SE

randy73

#6
October 03, 2017, 11:56:18 AM
Mine were counter sunk screws, different ones on each side and mine look like they were added.

CDN72SE

#7
October 03, 2017, 12:01:41 PM
Thanks for checking Randy, countersunk sounds right, in the meantime I had received an answer from Nacho on the 71-74 board.
http://wichargerguy.proboards.com/thread/21404/quarter-panel-molding-screws

Alan 
1972 Charger SE
Print
Go Up Pages1
User actions