my 69 build

[jwells1993]

so i started tinkering with my grille its in pretty good shape not many cracked spots it is broke on both corners where it sits under the bumper those will be fun to make what did you guys use to get off badly rusted bolts and rust rather not hack em with a cutoff wheel but thats last resort

[jwells1993]

 

[jwells1993]

 

[green69rt]

If the bolt or nut is close to something I wanted to preserve, I used a Dremel tool with a metal cutting blade.   You can use it as a cutting blade or as a very thin grinding wheel,  just takes time and patience.  You can get into tighter places with the little 1" wheel and you can also control the cut better.

[jwells1993]

If the bolt or nut is close to something I wanted to preserve, I used a Dremel tool with a metal cutting blade.   You can use it as a cutting blade or as a very thin grinding wheel,  just takes time and patience.  You can get into tighter places with the little 1" wheel and you can also control the cut better.

Great idea thank you I didn't think about using a dremel

[jwells1993]

got my grille all prettied up just waitin on my trim to come in and ill put her all back together and put it in

[Fitz73Chrgr]

Looks really nice!

[jwells1993]

Looks really nice!

thanks i cant wait to get the trim on it and see it all together better yet on the car

[VegasCharger]

got my grille all prettied up just waitin on my trim to come in and ill put her all back together and put it in

Looks great. 

Props to you for your hard work. 

[jwells1993]

got my grille all prettied up just waitin on my trim to come in and ill put her all back together and put it in

Looks great. 

Props to you for your hard work. 

thank you gotta have a hobby or else id go insane

[Harper]

looks great
and i especially like the fact that you use the tractor bucket for a table lol all that overspray will protect it

[jwells1993]

looks great
and i especially like the fact that you use the tractor bucket for a table lol all that overspray will protect it

haha its meant for work

[jwells1993]

picked up some new to me rims today wasnt sure if id like the gray center but its growin on me torq thrust 15x7

[jwells1993]

trims all on and grilles back together need a bracket and actuator for one headlight door though

[jwells1993]

got my motor all back together and purtied up ready to go back in the car waitin on motor mounts  hopefully ill get motor and trans in over the weekend

[TPR]

Great job on the grille. Makes me want to pay some attention to mine.

TPR

[green69rt]

How are you guys allowed to bring your car parts into the house???  If I tried to do that the wife would go crazy on my A$$!!!!

[Ghoste]

After my divorce it got much easier to bring car parts in the house.

[jwells1993]

How are you guys allowed to bring your car parts into the house???  If I tried to do that the wife would go crazy on my A$$!!!!

owned the house before my girlfriend moved in with me so shes a little lenient on thing a little not much hah

[jwells1993]

got my motor and tranny in now onto wiring actually had some decent days this week so i rolled her outside to work on her so she doesnt forget what the sun looks like the wiring harness im using is an ez wire kit i did one in a f350 last year with good results so heres to hopin i have the same this year i also lost track of time and was rushin to close up before work an i had a blonde moment where my passenger door was open as i was trying to pull the car back into the garage with my atv and i ended up bucklin the door up againt the fender  i guess one more thing to add to the to do list

[jwells1993]

 

[Baldwinvette77]

dude, i love your build, sucks about the door, but you seem to be more than capable of fixing 

[jwells1993]

thanks and ya im sure ill get er back too looking good but its just one more thing to add to the to do list 

[charge69]

You are doing a great job on your Charger and I cannot wait to see it run.

[jwells1993]

Thank you hopin to start it by this weekend waiting on a new slip yoke for the 727 don't wanna start it with the tranny dry got a buddy I'm getting a 750 street demon to get rid of that nasty lookin carb in top