Interesting car , possible race Daytona from facebook

[moparstuart]

‎Spencer Osborne‎ to Old School Cool
July 26 at 8:07am ·
Got a 70 Daytona old NASCAR supposedly came from a race shop in North Carolina trying to figure out whose it was so I can restore it back it has many colors of paint on it from plum crazy purple two a cream yellow even petty blue Richard Petty has looked at this car says he has worked on it but cannot help me identify who's it was back in the day any suggestions would greatly be appreciated

[nascarxx29]

Tg racing had series of post cards maybe paint colors may help also this one on ebay gas cap location looks right
https://www.ebay.ca/sch/i.html?_sacat=0&_nkw=joe+frasson

[nascarxx29]

Purple glotzbach color  light yellow james hylton  petty blue dave marcis

[6bblgt]

Tg racing had series of post cards maybe paint colors may help also this one on ebay gas cap location looks right
https://www.ebay.ca/sch/i.html?_sacat=0&_nkw=joe+frasson

gas cap is much further forward on the Frasson Daytona

need pics of the chassis to see how homebuilt it is, cage doesn't look too professional in the above pic - any stamped VIN numbers on it?

[Aero426]

Tg racing had series of post cards maybe paint colors may help also this one on ebay gas cap location looks right
https://www.ebay.ca/sch/i.html?_sacat=0&_nkw=joe+frasson

gas cap is much further forward on the Frasson Daytona

need pics of the chassis to see how homebuilt it is, cage doesn't look too professional in the above pic - any stamped VIN numbers on it?

Correct.  Without detailed chassis, interior and firewall pics, the exterior photos are almost useless.   It's not what you see on the outside that matters.    C500 plug is interesting.  Street car dash with defroster vents leads away from it a being a big time car.   

[6bblgt]

does the wing hole pattern on the quarter panel look "factory" stock?

[Old Moparz]

I can only imagine the excitement stumbling upon something like that. Very cool, I hope the guy can figure out some of the history.   

[1RareBird]

does the wing hole pattern on the quarter panel look "factory" stock?

Yes, but if it had a race wing the holes would look much different. 

[tan top]

    wonder what the story is was    as we all know a  lot can happen to a race car over the years , if its a real one from back in the day ,

 going off track a little , seem to remember in a grandnational race on DVD , a red & yellow 69 charger with a vinyl top / or black  painted  roof  , with stainless trim & sail panel charger name plate  & side marker reflectors , gas cap was in that location , don't mean much I know    pretty sure I took a screen capture of it & posted it on here some years back , know idea what thread though  

**EDIT **  tried lightening & enlarging ,    don't really help  

[wingcar builder]

The gas filler is back to clear the trunk hinge I would say.

[wingcar builder]

How do you post photos on here now that photobucket  is not hosting anymore?

[Aero426]

How do you post photos on here now that photobucket  is not hosting anymore?

Resize them to under 200kb and post them as attachments.

[Aero426]

Here are some of the pictures from Wingcar Builder.

[Aero426]

Rear shock area.   Diamond plate by Goober and Gomer.

[Aero426]

Cockpit

[Aero426]

Stock wing mounts.

[70 sublime]

The gas filler is back to clear the trunk hinge I would say.

I would think the gas filler is back that far to clear the wing braces more than the trunk hinges

[Highbanked Hauler]

Here are some of the pictures from Wingcar Builder.

That cowl has a lot that doesn't look right on it and for color it looks to be the factory yellow.

[UFO]

Used OEM dash frame? looks like part of the vin rivets are still there. But then again after many years and who knows how many backyard  racers had their hands on it.

[odcics2]

The gas filler is back to clear the trunk hinge I would say.

Mine clears and isn't far back...   

[Aero426]

If anything, the race wing supports would interfere with that fuel fill location.   

[wingcar builder]

If anything, the race wing supports would interfere with that fuel fill location.   

exactly. didn't know till today it still had stock wing brace still in it.

[Mike DC]

        

That chassis was probably made out of a 2nd-gen street car and was never rebodied to something later.  It's got '68-70 tidbits all over.