News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Value of 1/4 window, motor, regulator and interior on a 74.

Started by Vegas_Nick, July 30, 2017, 12:32:07 PM

Previous topic - Next topic

Vegas_Nick

I don't want to end up in the "delusional seller" thread, so I am asking first!

I am going to pull the 1/4 windows, regulators and motors as well as the interior trim from the rear. I am making Lexan windows to install NACA ducts in, so I want to sell these bad boys. Would prefer to sell them all together if possible. Any idea on what they would be worth? I have been told like $400 for the setup on both sides. Is that close or ....delusional?

Thanks!!

Mytur Binsdirti

If it ere for a 68-70, I'd say it's worth the dough you're asking. But since it's a 74, you should put it out there at best offer.

Nacho-RT74

I'm kinda agreed with Mytur, however knowing what you are doing on your car I'd sell the full 4 windows powered set and become front doors on manual system. You could get around $600-700 for just the regulators, motors, switches and uncut harness and relay/breaker. And spend maybe $100-150 on front manual regulators. Is just an idea. Find a full set like that is not easy and kinda valuable, but as a full set.

Will need of course to fill your front door panels new fro manual windows or get an used beige set with the crank hole. I don't think could be that hard ( 71/74 are the same )

Interior rear panels maybe $100-120 for the rear set ( uppers and lowers ) depending on conditions. Maybe more if lowers are absolutelly non chalky. 74 market is reduced on lower rears since they are diff from the 71/73 even thinking 71 72 and 73 are actually different from each other although intechangeable. Not 74 thought

I'd love to have a full 4 windows powered system on my car someday, but find a white upper rear brougham panels for hartops without the crank hole could be nearly imposible to find. Would need to find somekind of hole plug to the upper panel for a while

Sell the rear set could get a nice buyer on somebody trying to convert an SE ( with front powered setup ) on to a hardtop, but still upper interior panels will match just if his SE are not brougham. Will need to get the 4 ways driver's door switch too and I guess the harness for it. Just the regulators system with motors could be on around $200

Soooo, selling like you are thinking, interior panels and regulatos system, yes, maybe could be rated close to what you posted, but will need to find the right buyer for it

Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Nacho-RT74

Forgot about the glasses value itself... maybe on 60-80 each one ?
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Vegas_Nick

Quote from: Nacho-RT74 on July 30, 2017, 08:55:51 PM
Forgot about the glasses value itself... maybe on 60-80 each one ?
Thanks Nacho! We will see when I get it out. No trying to make a ton of $$ just don't want to toss them out.