which engine mounts (68)

[euroZ06]

Hello,

I have a 68 charger and it needs to have engine mounts replaced. Car was originally 318, but at some point got a 383 transplant.

I tried goggling and it gives me very different options. Any advice?

[justcruisin]

If it is a stock or mild build just go with the factory biscuits. A friend used the poly locks and there was a noticeable amount of vibration. I have the factory mounts fortified with a couple of countersunk bolts on the drivers side on my 440 and they work great.

[euroZ06]

If it is a stock or mild build just go with the factory biscuits. A friend used the poly locks and there was a noticeable amount of vibration. I have the factory mounts fortified with a couple of countersunk bolts on the drivers side on my 440 and they work great.

can you please show me the link of what are factory biscuits? When I google engine mounts, many different options come up.

[BLK 68 R/T]

Here you go.

[Dino]

I use the cheap mounts from either O'Reilly or Rockauto, I forget which. I did add a short torque chain on the left mount because my old mount snapped.

[firefighter3931]

Once you get your new mounts follow the link below to make it bomb proof !

http://www.dodgecharger.com/forum/index.php/topic,13216.0.html



Ron