unisteer and borgeson power steer pump help

[dodgey68]

ok , i currently have a uni-steer r&p kit on my b-body mopar, 68 charger, ,, im not happy with it, it chews up front tyres and bump steer is a bit scarey when at speed limit,  , i just got hold of a borgeson steering box of a b-body mopar with lines and steering  coupler, , my question is can i use  the unisteer low flow -low pressure ps pump already  on the car or do  use  the  old saginaw original 68ps  pump, I have red a lot of info but cannot seem to find the wright info, ps pressure of pumps vs pressure needed to run borgeson steer box ,  can any one help,, thank you

[c00nhunterjoe]

What is the current pump on the car putting out for pressure? Factory pumps could be anywhere from 900 to 1500 psi depending on the year and engine. I lowered the pressure on my saginaw pump down to 750 psi and loved the feel on a factory box.

[dodgey68]

the pump on the car at present is the unisteer rack & pinion kit pump