Anyone have pictures of the ashtray light installed on a 69 charger?

[WHITE AND RED 69]

I was looking to see if anyone had any pictures of the ash tray light installed on a 69 charger. I couldn't seem to find one in the search box?

[VegasCharger]

I was looking to see if anyone had any pictures of the ash tray light installed on a 69 charger. I couldn't seem to find one in the search box?

Hello Clayton. I just parted out a 1968 B Body dash and I took pics of the tear down. I believe when it comes to the wiring for the ashtray the 68s & 69s are the same. See if these pics help out. Please ask if you have any questions.

[WHITE AND RED 69]

Awesome! Thanks Bryan   

I bought a light off ebay but it looks a little different from the light on your pics. That's probably why mine didn't fit 

[VegasCharger]

Awesome! Thanks Bryan   

I bought a light off ebay but it looks a little different from the light on your pics. That's probably why mine didn't fit 

Yea it's basically a small pig tail where the light bulb socket slides into the ashtray tube and snaps into a locking position. Then the male bullet connector goes to the accessory block.

If you still need the correct pig tail wire I have one. 

[WHITE AND RED 69]

Thanks for the offer but my new harness has all the connectors needed.   

My ash tray is a bit different and doesn't have a hole on the side? Mines on the back and when I put the light in hits the ash tray when it closes. I'm thinking the proper way to fix it is to make a little bracket to make the bulb sit further back so it doesn't hit. Or drill a new hole on the side? Or just forget about it since I won't ever use it   

Were ash trays different depending on the year or options offered?

[green69rt]

Here's pics of mine.  Looks like yours doesn't have the notch in the ashtray sheet metal that clears the light.

[tan top]

Here's pics of mine.  Looks like yours doesn't have the notch in the ashtray sheet metal that clears the light.

mines like that , 69 model 

[WHITE AND RED 69]

Here's pics of mine.  Looks like yours doesn't have the notch in the ashtray sheet metal that clears the light.

Thanks for the pictures. It has a bit of a notch but I think the usb cable is hiding most of it. I had it all wrong and was trying to mount it a little different. But those pictures cleared it up. When I get home I'll see if it fits like yours.   

[Derwud]

I just mounted a stick on Blue LED light in the inner frame..

[mopar0166]

Nice write up

[WHITE AND RED 69]

Just needed to move the USB port a little further back and BINGO! Thanks guys   

[plasticman-32]

i love that usb upgrade