Putting pistons in the cylinder

[flashley18]

Ok now I'm ready to put the pistons in the cylinders.  A couple of questions-what do  you coat the cylinder walls with oil, transmission fluid and also do I use assembly lube on the main bearings and the rod bearings or just use oil??

Thanks for your replies.

[Just 6T9 CHGR]

I soaked my pistons in 30W oil and coated the inside wallw with it as well.
I used moly assy lube on the bearings

[Chryco Psycho]

I soaked my pistons in 30W oil and coated the inside wallw with it as well.
I used moly assy lube on the bearings

I agree
use engine oil on the pistons & rings & coat the brgs with a proper assy /brg lube