1969 Charger stock rims for hubcaps?

[Bad B-rad]

Hello, I was wondering were do I get new(repo) rims to accept my stock Hubcaps?
Who has the best prices? And were can I get them.
I have only found the cop car ones. My car had the org hub caps in trunk, but 3 different rims came on the car when I got it,none of witch were the correct rims for the caps to install on.
Also stock, they were 14 inch, do they make a 15 inch rim that will take the stock(14inch) hubcap?(my caps are what came on the "White hat special" cars)
My car is a 383 4bbl/auto A/C car. So I think all rims were the same when car was new, VS the ones that had wider rims in the rear and slimmer up front.
Thanks for your help.

[RallyeMike]

Coker Tire now makes a stock steel Mopar wheel. That's the only place I know of.

[Bad B-rad]

Ok cool, I will have to check them out.
Have you ever heard or know of a 15 inch wheel that will take the 14 inch stock hub caps?
I was thinking of maybe getting a extra set of hub caps and putting my cars originals away and modify a set of 14 inch cap to fit the 15 inch rim, unless that would just end up looking stupid.

[Alaskan_TA]

15" steelies with the correct bolt pattern that take caps are common on some C-bodies, & 1/2 ton trucks & vans.

[Bronzedodge]

There was a build thread where someone did a one-off set of aluminum rims that mimicked the 69 wheel covers.  Can't find it at the moment.  If you can weld stainless without distortion, I'm sure there's a solution.   

[Bad B-rad]

Yeah I was thinking the 15 inch wheels that take the 14inch wheel covers would be a custom home made job. Maybe mounting tabs so the covers can be bolted on with two small bolts/screws.
My car is a"white hat special" and I want to run the hub caps that came with it, but on my 1966 Charger I ran Magnum 500's that were 14 inch and I only had two tire choices, Cooper Cobra, or BF's.
I was thinking 15 inch would help with tire choice and what not.