News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

69 Charger 383 Aluminum Radiator Fan Clutch Clearance

Started by nickm, April 23, 2017, 01:41:56 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

nickm

April 23, 2017, 01:41:56 PM
Hey Guys,

  I just installed an aluminum radiator http://www.classicindustries.com/product/mopar/parts/mb2358a.html

But I'm having clearance issues fitting my fan clutch https://m.summitracing.com/parts/hda-2747

The gap between the radiator and water pump is 3 inches, maybe a little less...

Any recommendations?   :shruggy:

cdr

#1
April 23, 2017, 02:27:22 PM
you need a 2947
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

Mopar4me

#2
April 24, 2017, 12:21:30 PM
X2 on the Hayden 2947 clutch. Had the same issue using the Griffin radiator with the shorter 2947 it fits perfect.
Print
Go Up Pages1
User actions