unrestored 68 Belvedere slant 6 ....

[tan top]

 

[tan top]

 

[hemi-hampton]

I wonder if there is a way to remove that Zeibart coating with out removing some of the factory paint under it?    LEON.

[tan top]

I wonder if there is a way to remove that Zeibart coating with out removing some of the factory paint under it?   LEON.

how I've done it in the past , ive used  a slow  paint shop de greaser /sprit / panel wipe  , even lacquer thinners / gun wash  ( dependent on  what the cars been painted in )  , on a  cloth / rag  also a plastic filler  spreader wrapped in a  panel wipe soaked rag ,  messy & a long  job ,  don't be tempted to use  red or gray scotchbrite  soaked in degreaser  either  , once the majority of the wax stuff is off , I use a fast  panel wipe and more cloths / rags  ,a fast evaporating one because !  ,  just soo the solvent is not  on the original paint ( depending what original paint / type of car )  so little chance of it attacking / softening the paint  ,  &  pickling /  lifting , a factory  primer / paint  over spray  finish .