News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Quarter panel stainless belt molding trim clips

Started by BLK 68 R/T, March 17, 2017, 12:47:40 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

BLK 68 R/T

March 17, 2017, 12:47:40 PM
I have a few questions regarding the attachment of the quarter panel stainless belt molding trim piece for a 68 charger.
a) Are the j-clips being reproduced yet?
b) How many of the j-clips are there on each side? Looks like there is a place for 4 on each side but I only have 3 per side and was wondering if that was normal or not?

cdr

#1
March 17, 2017, 01:00:12 PM
3 on each side.
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

BLK 68 R/T

#2
March 17, 2017, 03:33:19 PM
Quote from: cdr on March 17, 2017, 01:00:12 PM
3 on each side.

Perfect! thanks.

Print
Go Up Pages1
User actions