News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

No fire from distributor

Started by Dodgerdallas, December 24, 2016, 03:49:23 PM

Previous topic - Next topic

Dodgerdallas

Installed a firecore dist/setup and has worked great but started her up the other day and ran for a few seconds and died.I checked voltage to the +coil,11.53 and cranking was 8.69. Im getting 11.53 to the rotor with key on  and placed an inline spark tester on the #1 and turned her over and no sparks leaving the distributor.As stated before it was running great and died suddenly-anyone have any ideas im stumped.
This is gonna be cheap and easy......

poppa

God must love stupid people....he made a sh**load of 'em....

Matco tools...guaranteed for a lifetime. Just not a human lifetime.

Dodgerdallas

No I couldn't get any real help with the firecore folks so im just going back mostly stock,if you could read my post I just made on the engine forum maybe you could give me some help thanks
This is gonna be cheap and easy......

rollo1504

During reading through the forum I found this topic:

http://www.dodgecharger.com/forum/index.php/topic,117087.0.html

The man to be contaced with your issues might be Ron (User firefighter3931).... as he is supposed to be the overall specialist with firecore parts  :icon_smile_big:

Give it a try...

Good luck

Dodgerdallas

I just ditched it and went back stock,expensive 1000 miles but sticking to what I know,thanks for responses.
This is gonna be cheap and easy......