News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

1968 Charger heater box lower dash cover P/N 2837638

Started by raybork, February 27, 2017, 05:47:05 PM

Previous topic - Next topic

raybork

I'm trying to install this cover on my lower dash on my 1968 Charger. However, I can't seem to get it to fit in the right position. My car is non-A/C. Does this particular cover only work with A/C cars? If so, is there a way I can modify the dash frame for this cover to fit properly. Would really like to cover up the heater box as much as possible, if possible.

Thanks

Chris

gtx6970

You referring to one of these

john108

68 Charger with AC
Questions on my picture from another post previously made

hawkeye

The bottom hole attaches on a stud that comes off the AC/heater box.

gtx6970

Quote from: hawkeye on April 13, 2017, 07:07:59 PM
The bottom hole attaches on a stud that comes off the AC/heater box.

Correct, and that stud is on AC boxes only.
Adapting it to a non air box will require some fab work, if its even possible / plausible