Hydroboost users, what size bore does your mc have?

[Dino]

I'm thinking somewhere around 1" - 1-1/4" should work well with a hydroboost and big brakes off a Mustang. What are you guys running?

I have a Dodge Ram mc but I decided not to use it as it needs to be modified to fit the Astro van hydroboost unit. There's gotta be a ton of mc's out there that are a direct bolt on. And maybe that way I can reuse the stock push rod as well. I'd keep an Astro mc on there but damn they're ugly!

Also do you have the mc lines on the engine side or fender side? Mine are on the fender side but after mounting the hydroboost with the Tallon billet plate it dropped the whole unit quite a bit and the lines are super close to the shock tower. So close that I had to bend the stock lines so tight they broke. So either I bend my own lines so they run upwards and to the side or I find an mc with lines on the engine side.

[MSRacing89]

We run this Wilwood MC (1 1/8") with the Hydroboost set-up.  We run a Brembo 6 piston up front and and wilwood 4-pistons in the back.  You can feed the system from either side.  No need for you to go larger on the bore than this.

https://www.summitracing.com/parts/wil-260-8556/overview/

I have one of these sitting here (used) if you want it.  I switched to a black one.  PM me if you want it. 

[Dino]

We run this Wilwood MC (1 1/8") with the Hydroboost set-up.  We run a Brembo 6 piston up front and and wilwood 4-pistons in the back.  You can feed the system from either side.  No need for you to go larger on the bore than this.

https://www.summitracing.com/parts/wil-260-8556/overview/

I have one of these sitting here (used) if you want it.  I switched to a black one.  PM me if you want it. 

Tried to pm you but your inbox is full.   

[MSRacing89]

We run this Wilwood MC (1 1/8") with the Hydroboost set-up.  We run a Brembo 6 piston up front and and wilwood 4-pistons in the back.  You can feed the system from either side.  No need for you to go larger on the bore than this.

https://www.summitracing.com/parts/wil-260-8556/overview/

I have one of these sitting here (used) if you want it.  I switched to a black one.  PM me if you want it. 

Tried to pm you but your inbox is full.   

Try again!

[Dino]

We run this Wilwood MC (1 1/8") with the Hydroboost set-up.  We run a Brembo 6 piston up front and and wilwood 4-pistons in the back.  You can feed the system from either side.  No need for you to go larger on the bore than this.

https://www.summitracing.com/parts/wil-260-8556/overview/

I have one of these sitting here (used) if you want it.  I switched to a black one.  PM me if you want it. 

Tried to pm you but your inbox is full.   

Try again!

[Derwud]

Do you have pictures of your setup?

[One mopar]

The boch type is on this site look for anyone tried hyro boost brakes  and u can see the pictures. I looking for a bendix abs 9 or 10 master cylinder it's smaller