News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Heater box mounting gaskets

Started by 68ChargerJMP, February 21, 2017, 09:10:52 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

68ChargerJMP

February 21, 2017, 09:10:52 AM
Do the little donut gaskets that fit over the mounting studs go on the interior firewall side or the engine compartment side, or both if I have extra? I'm thinking they go on the inside. Thanks.

cdr

#1
February 21, 2017, 09:14:59 AM
on the inside
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

68ChargerJMP

#2
February 21, 2017, 11:50:01 AM
Thanks cdr.
Print
Go Up Pages1
User actions