69 Daytona 440 four speed , B5 with B5 interior , XX29L9B355101

[held1823]

wonder where the w/o chrome ended up? the back up lamps are bizarre. did someone actually reproduce a valance without the cutouts?

[A383Wing]

did someone actually reproduce a valance without the cutouts?

68 Charger rear valance did not have the holes down there for reverse lights, the back up lights were up with the tail lights

[held1823]

did someone actually reproduce a valance without the cutouts?

68 Charger rear valance did not have the holes down there for reverse lights, the back up lights were up with the tail lights

ah yes, see what happens when one focuses on model year specifics. lol

[marshallfry01]

Looked much better with white interior IMO. 

[hemigeno]

Just noticed a 70 K-member with a 69 sway bar?

Is that correct for Daytona's?

Yes - and other late 1969 models as well (at least B-bodies anyway, not sure about A or C models).  During that timeperiod, which envelops most if not all of the A12 production run too, the K-frames were essentially made from a '69 top half and a '70-style bottom half.

[500Jon]

Nice one Geno!

Must remember that next time I clone a Daytona lol...

I suppose its ok to use a Plymouth-RR one too?

[69_500]

Ernie your right that is one of my dads old cars. Was in Germany in the 70's as well

[Charger_Fan]

It looks like at some point, someone must have spray bombed the whole dash black...including the VIN tag?