3rd Generation parts hunting.......so what do ya want!?

[Goldfinger71]

Hey Guys,
In another week or two im going to a mopar junkyard that has a couple of 3rd gen cars.Im going to pick up some things for my car but,I figure I would ask the family here what you wanted or needed so I could be on the lookout for ya!I can not at this time ship or pick up HUGE items like hoods,bumpers,sheetmetal,etc.But I can pretty much ship other items...................so what do you need?........llet me know and I will see what I can do.
P.S Twilt,don't ask me where this yard is!......you've got enough parts already!haha!

[twilt]

I dont need to know. I already know where there are plenty 3rd Gens in NC junkyards should i get the notion to come that way. Remember.... I used to live in Goldsboro. I generally steer clear of Mopar salvage yards anyway- prices are usually too high.

[Dans 68]

A nice clear set of taillight lenses for my '73 SE. Good luck!

Added: Oh, and a dual exhaust rear valance, and a bulge hood, and a ....

Dan

[73rallye440magnum]

Passenger side door glass? 73 non tinted.

[71charger_fan]

I could use the inner grille pieces for a '71 concealed headlamp setup. I currently have a nice '72 set on the car. one side was '71 and one side was '72 when I bought the car. I'm embarrassed to admit it took me years to notice.

[Goldfinger71]

twilt
Senior Member

Offline

Posts: 594

JUNKYARD DAWG


  Re: 3rd Generation parts hunting.......so what do ya want!?
« Reply #1 on: Today at 11:45:53 AM »   

--------------------------------------------------------------------------------
I dont need to know. I already know where there are plenty 3rd Gens in NC junkyards should i get the notion to come that way. Remember.... I used to live in Goldsboro. I generally steer clear of Mopar salvage yards anyway- prices are usually too high. 

Report to moderator    Logged 

--------------------------------------------------------------------------------
Three 72 Charger Topper`s, 72 Rallye 340 with N96
Yeah.............I do like 72 Chargers

Twilt,I have been going to this mopar yard for about 15-20 years,I have a good relationship with the folks there.They are pretty fair people.
How are the Charger's coming along?How is your son doing with his Charger?

[73ChargerSE]

I need the piece of trim that goes on the back of the driver's fender (by the windshield) for a '73 SE.  Thanks 

[twilt]

Twilt,I have been going to this mopar yard for about 15-20 years,I have a good relationship with the folks there.They are pretty fair people.
How are the Charger's coming along?How is your son doing with his Charger?

Knowing the folks well is always a big plus. Other than getting Stormhammers old car running, i havent done a darn thing to any of my cars. Well, i did pressure wash one of them a few weeks ago... if that counts.   I sold the 74 i had bought for my son. unfortunately, he  just isnt interested in old Chargers................ I think he wants an Audi . i told him that he will have to  buy that himself and that i wont be working on it. Right now, the wife and i are rapidly paying off all of our consumer debt. Once that is done, the garage can be finished and only then can i start on any of my cars. The tiny one car garage we have now just doesnt cut it. I put a parts car in there once...... with the nose of the car touching the front wall, the door closed with about an inch and a half to spare. actually....if you run across one..... i could use a 71-72 b body floorshift steering column (with p/s) for Stormhammers old car.

[Daytona R/T SE]

I'd like a dual cutout rear valance for my '72     But I ain't holding my breath


'Course I'd like Jessica Alba to be my ever-obedient house girl too, but that ain't happenin' either

[RD]

I would like to have a medium gold interior console if you could find one.  I have a black one for trade if you like.

[Dans 68]

I'd like a dual cutout rear valance for my '72     But I ain't holding my breath

Geez, I thought this was a want list, not a wish list! I guess I'll go to my earlier post and update it, so my wish can be first! 

Dan

[TruckDriver]

Front and rear bumperettes for a '72 with all the plastic, no major rust and no snaped off bolts. Also I'm not sure, but I think there are mounting brackets behind the bumpers for them I need too.

[twilt]

Larry, looks like you might need some help getting all these parts pulled. need a helper?

[Goldfinger71]

haha

[teddy1500]

I sure would like to find a straight, rust free passenger side fender for a 73

[red72chrgr]

decent dash pad sir would be nice.

[Nacho-RT74]

I thought I had on hands a 72 and laters manifold shield stove, but it looks was to regular manifolds and won't fit on HP manifolds... soooo, I wish/want one to HP, even better if is with Hose up to air purificator

[andy74]

i want an original antenna,and the bezel for the fender-Andy

[Goldfinger71]

O.k guys I will see what I can do! .........................Just don't stick me if I find some of these particular parts and you decide you don't want them, :icon_smile_angry:becuase I will paying for these items out of pocket then in turn sell to everyone that was looking for particular parts,my prices will be fair! .....................but like our mom's and dad's used to tell us......money doesn't grow on trees!

[BLACKWOLF]

a 73 non-se rear clip.
MY TAIL PANEL IS RUSTED OUT AND THE PANEL THAT MY FILLER NECK GOES THROUGH. AND THE THE OUTER WHEEL HOUSES ARE RUSTED.

[Nacho-RT74]

don't worry about SE or not SE... both rear clips are the same... difference is just fiberglass plug to fill the quarter window opening.

Another stuff to find just in case:
-Rallye cluster speedo in Km. ( I know this is EXTREMELLY HARD )
-rear speaker/deffog blower adaptor. ( I know... extremelly hard and "madly" expensive, so is just in case :-/ )
-rear 6x9 speaker, no matter if needs to be reconed ( to install when I find the adaptor ). I can get perfect aftermarkets here but...
-alt/compressor Belt idler to BB.
-Any interior white PLASTIC panels ( doors exception ). Note: rear 74 ones are totally different than the rest. Please I don't care if it has some regular use scratches, but just that won't be CHALKY or YELLOWED.
-white windlace covers... is a vinyl part that runs from door sill plate up to quarter window jam.
-73/74 SE rocker moldings.
-2 speeds wiper switch Rallye Cluster ( 72/74, 71 is different ).
-Parking wiper cam dust rubber cover.

But HEY... all depends of price... right now I'm on limit about money and still have to pay international shipping about some stuff I have up there.

[XXSpiralXX]

  I need a front valance for a 72. Gotta be cheap and unbent.

[twilt]

ooops, almost forgot.... i need a mint 71-72 Ramcharger hood . Must be complete and under $200

[WM23N1G1]

Well, two very good front parking lenses would make my day
I know I dream even when I'm awake

[chargerkid]

I can honestly say that I have every part that everyones asking you for.

What about some R/T doors!!!!!!!