Cut Blue Console

[Arbitrage123]

I bought a 1968 Charger RT and am trying to bring the car back to the "original" blue interior. Unfortunately the previous owner cut the center console tip to fit a below the dash AC unit. Since it is one piece of plastic I do not think it is salvageable. Does anyone have any ideas? Alternatively, I was thinking of getting the reproduction console plastic and having it painted blue. Does anyone know the best way to do this or have any paint codes? Thanks

-B

[Dino]

IF you have the cut off piece and a thin blade was used then you can plastic weld it back together, but reproducing the grain is near impossible so I don't know if I'd even try. I'd place an ad here on the board for a nice used console or look on ebay.

[Arbitrage123]

IF you have the cut off piece and a thin blade was used then you can plastic weld it back together, but reproducing the grain is near impossible so I don't know if I'd even try. I'd place an ad here on the board for a nice used console or look on ebay.

The cut piece is long gone. Looks like the search is on.

[twenty mike mike]

Looks like Bahama Blue for the console. The chart only calls out a console color for the Dart, but the Charger and Dart share the same blue interior colors, with different grains, so I figure the console should be the same color as the Dart.

http://www.hamtramck-historical.com/dealerships/1968ColorAndTrim-01.shtml

I got a reproduction console, so I'll have to paint it.