Daytona back window glass options ?

[70 sublime]

I have posted an ad in our local on line classifieds looking for parts for my Daytona clone project

I had previously thought I had found a bunch of parts but pretty sure it was a hoax as I never got any pictures
With many delays and excuses when it came right down to it to go see them they got stolen the night before (yea right) so I started searching again and posted my ad

I had one guy respond about an hour away from me that was also building a clone with a Vega hatch but he also has a metal reproduction Daytona plug he would like to sell
A bit pricey but is correct

I saw it in person yesterday and it looks good

Before I go this route I need to figure out the window glass part of the puzzel

What is out there that is available that will fit and how much $$$$ is it going to cost me to get it to my home in Canada ?
I do not need a glass with a 1969 date code on it

What have others used ?

Would even a piece of Lexen work to get the car going ?
If I weld in the plug and do not like the cheap glass it would not be hard to upgrade it and put in a fancy correct piece later on 

[Daytona R/T SE]

I have posted an ad in our local on line classifieds looking for parts for my Daytona clone project

I had previously thought I had found a bunch of parts but pretty sure it was a hoax as I never got any pictures
With many delays and excuses when it came right down to it to go see them they got stolen the night before (yea right) so I started searching again and posted my ad

I had one guy respond about an hour away from me that was also building a clone with a Vega hatch but he also has a metal reproduction Daytona plug he would like to sell
A bit pricey but is correct

I saw it in person yesterday and it looks good

Before I go this route I need to figure out the window glass part of the puzzel

What is out there that is available that will fit and how much $$$$ is it going to cost me to get it to my home in Canada ?
I do not need a glass with a 1969 date code on it

What have others used ?

Would even a piece of Lexen work to get the car going ?
If I weld in the plug and do not like the cheap glass it would not be hard to upgrade it and put in a fancy correct piece later on  

There was a reproduction Daytona window glass in the parts for sale section not too long ago...I think he was in Oregon or Washington state.

[Nwcharger]

I have an aftermarket Daytona rear window For sale

[Aero426]

If you use the OEM Daytona rear glass and plug, you will also need to buy the rear window trim.   So it's more correct, but more expense.   

[70 sublime]

I have posted an ad in our local on line classifieds looking for parts for my Daytona clone project

I had previously thought I had found a bunch of parts but pretty sure it was a hoax as I never got any pictures
With many delays and excuses when it came right down to it to go see them they got stolen the night before (yea right) so I started searching again and posted my ad

I had one guy respond about an hour away from me that was also building a clone with a Vega hatch but he also has a metal reproduction Daytona plug he would like to sell
A bit pricey but is correct

I saw it in person yesterday and it looks good

Before I go this route I need to figure out the window glass part of the puzzel

What is out there that is available that will fit and how much $$$$ is it going to cost me to get it to my home in Canada ?
I do not need a glass with a 1969 date code on it

What have others used ?

Would even a piece of Lexen work to get the car going ?
If I weld in the plug and do not like the cheap glass it would not be hard to upgrade it and put in a fancy correct piece later on  

There was a reproduction Daytona window glass in the parts for sale section not too long ago...I think he was in Oregon or Washington state.

What glass did you use in your car ?

[70 sublime]

I have an aftermarket Daytona rear window For sale

After Daytona R/T SE pointed it out I saw your ad
Says you would prefer local pick up and I can understand that

Are you willing to pack it up safe and ship it ?
Any idea how much that would cost without going to all the trouble to box it up ?

I am just trying to get an idea how much everything will cost if I go this route before I start spending any money

[Daytona R/T SE]

I have an aftermarket Daytona rear window For sale

That's him!

[Daytona R/T SE]

I have posted an ad in our local on line classifieds looking for parts for my Daytona clone project

I had previously thought I had found a bunch of parts but nopretty sure it was a hoax as I never got any pictures
With many delays and excuses when it came right down to it to go see them they got stolen the night before (yea right) so I started searching again and posted my ad

I had one guy respond about an hour away from me that was also building a clone with a Vega hatch but he also has a metal reproduction Daytona plug he would like to sell
A bit pricey but is correct

I saw it in person yesterday and it looks good

Before I go this route I need to figure out the window glass part of the puzzel

What is out there that is available that will fit and how much $$$$ is it going to cost me to get it to my home in Canada ?
I do not need a glass with a 1969 date code on it

What have others used ?

Would even a piece of Lexen work to get the car going ?
If I weld in the plug and do not like the cheap glass it would not be hard to upgrade it and put in a fancy correct piece later on  

There was a reproduction Daytona window glass in the parts for sale section not too long ago...I think he was in Oregon or Washington state.

What glass did you use in your car ?

I got mine from Iowa glass( no longer in business) several years ago.

[Daytona R/T SE]

If you use the OEM Daytona rear glass and plug, you will also need to buy the rear window trim.   So it's more correct, but more expense.    

Trim for a clone is easy to make

I have a thread on here somewhere...

[70 sublime]

If you use the OEM Daytona rear glass and plug, you will also need to buy the rear window trim.   So it's more correct, but more expense.    

Trim for a clone is easy to make

I have a thread on here somewhere...

Yup
I already looked it up 

[odcics2]

I have a set of original rear glass trim for sale... (in parts for sale section)

It's been confirmed the repops don't fit worth a %^&* !!   

[Daytona R/T SE]

If you use the OEM Daytona rear glass and plug, you will also need to buy the rear window trim.   So it's more correct, but more expense.    

Trim for a clone is easy to make

I have a thread on here somewhere...

Yup
I already looked it up 

[70 sublime]

I have a set of original rear glass trim for sale... (in parts for sale section)

It's been confirmed the repops don't fit worth a %^&* !!   

Well I would have to decide do I want a metal Daytona window plug , glass to fit the plug ,enough Charger window trim to piece together some trim , new head liner , new seat covers for front and back seats 

OR

5 pieces of window trim that came off a real Daytona

Thanks for the offer but I think I will pass on them for now 

[odcics2]

I have a set of original rear glass trim for sale... (in parts for sale section)

It's been confirmed the repops don't fit worth a %^&* !!   

Well I would have to decide do I want a metal Daytona window plug , glass to fit the plug ,enough Charger window trim to piece together some trim , new head liner , new seat covers for front and back seats 

OR

5 pieces of window trim that came off a real Daytona

Thanks for the offer but I think I will pass on them for now 

Agreed - for that price, they belong on a real Daytona.