Factory vinyl roof picture

[Mytur Binsdirti]

On an original vinyl roof car, I'm looking for a picture showing how the vinyl material goes into the stainless belt line molding at the rear curve. I know it's not supposed to be like this....

[Mytur Binsdirti]

Thank you in advance! 

[Dans 68]

Here is the best I have in my files. I do not know if it is original, but it is off of the XS29J8B302022 Hemi Car.

Dan

[C5X DAYTONA]

This is the original Vtop on my 69 RT SE.    Both sides are cut like this.   

[C5X DAYTONA]

My RT SE is a factory sunroof car in case that makes a difference.

[Mytur Binsdirti]

Man, that's pretty sloppy on the left side. Thanks for taking the time to take & post the pictures. 

[moparnation74]

Sounds like the green machine is getting a new hat

[Dino]

Man, that's pretty sloppy on the left side. Thanks for taking the time to take & post the pictures. 

Did you expect anything else from ma mopar?

[Challenger340]

I'll go get a few Pics, I know mine is original and has never been touched, stay tuned.  (NOT insinuating anybody else's ain't)

[triple_green]

not orig but done by long time upolsterer

[Challenger340]

1969 R/T SE, Original Vinyl Roof.

Pictures are bit blurry, but in case it isn't all that clearly shown, there are "creases" in the Vinyl at the root of the drip rail before it goes under the trim, but no cuts/slices and all metal is fully covered.

[dual fours]

Had to look, this is what I have, 1970 SE. Build date A15 = Oct.15, 1969. Date first titled 11-18-69.

[DeltaV]

Here is the original vinyl on my '70 Charger...driver's side.

[Mytur Binsdirti]

Thanks everyone!   

[tan top]

   Jeff ,  AKA (69rtse4spd) ,  sent me these photos of his Y2  R/TSE four speed & asked me to post them here    

[tan top]

  

[Charger-Bodie]

Way Awesome !!!

[tan top]

  Jeff ,  AKA (69rtse4spd) ,  sent me these photos of his Y2  R/TSE four speed & asked me to post them here    

more good pictures from Jeff