70 Charger interior panels ??

[Moparpoolman]

Were woodgrain door / interior panels available for NON SE 1970 Chargers from the factory? Any known cars without A47 / SE option come with them?  Also are the script Charger emblems on them available? Thanks

[bad88t-top]

No and no

[charger chris]

  man that sucks now I have to fined those for door panels

[DAY CLONA]

Were woodgrain door / interior panels available for NON SE 1970 Chargers from the factory? Any known cars without A47 / SE option come with them?  Also are the script Charger emblems on them available? Thanks

The woodgrain panels were exclusive to SE, and R/TSE only

As far as the "Charger" emblems on the 70 door panels, no one offers them repro...but, if you use the base model "Charger" emblem from the rear tail light panel, which is available repro, merely cut of the arrow isignia, the Charger script is about the same size, there will be 2 swedge pins on the Charger portion of the lettering, when I mounted it on my door panel, I used a flap wheel disc grinder to smear the pins over to swedge/stake it on the door panel, just a quick hit with the wheel, as the new zinc diecast repros are rather soft, too soft to hammer swedge the pins as the emblem either distorts or fractures, so use the kiss of a flap disc to smear the pins, you can't use any speed nuts/clips. as the panel sits rather flush with the door, unless you want to drill clearance holes in the door for the pins to extend into for attaching the emblem with speed nuts/pal nuts

Here's my door with the repro emblems

[DAY CLONA]

Here's the tail panel emblem I mention, and if you are going to install SE panels (repros I assume) here's the emblem location

[DAY CLONA]

And if your going with standard/RT panels here's the emblem location with hand crank panels

[Kern Dog]

Man...That Dayclona dude has the info!