Clips/studs needed for lower tail panel chrome trim - 68 Charger

[timmycharger]

I only have 2 of the studs left from my original tail panel lower chrome trim, the others are either missing or broken, I think there are a total of 6 so I need 4 more if possible.  The chrome trim is very thin, and these studs have a backing and slide into the chrome trim and get fastened on the other side by stamped style nuts.

Looking for 4 of these. I searched R/T specialties, couldn't find them  



Edit*  Sorry Mods, I think this should be in the parts wanted section

[gtx6970]

I just did this a week or so ago. Auveco makes them, Go to any reasonable parts store and look them up. If I remember right the ones I bought have a 5/16" base ?

But I had to break the spring wire clip off for them to fit in the  moulding


EDIT
Just found them - Auveco number is 2744 for a box of 50 . Cost me less than $10

Hard part is finding the special cap style sheetmetal nut . Auveco makes a nut that works but its an open nut and I was afraid of something getting caught on the exposed studs in the trunk. I had some of the cap style on hand

[timmycharger]

Excellent!

[timmycharger]

Thanks for the tip, they worked perfectly!