Coil Recomendations for stock ignition with a balast resistor (440)

[nge]

(1973 Charger 440 4BBL)
I just got my pertronix flame thrower and found out that the application chart in the box recommends removing the ballast resistor.  Since I have a double ballast resistor I would avoid messing with it. 
Does any one have any recommendations of a good coil that can take the heat from sitting atop a 440 and if oil filled or epoxy filled is better?
thanks
Vic

[Mopar Nut]

The advantage to the epoxy filled, it'd mount on it's side with no problem and will take the heat better.


MSD 8222

[nge]

Thanks,
I have one here, but the instructions warn against using it with a ballast resistor.
I'll give it a try

[Mopar Nut]

Works good with mine.