Stock Spindles 68 Charger same as 74-78 Mustang II ?

[RIDELIKEHELL]

Just wondering the difference as I am going to a stock spindle & want to know if the Mustang II that are part of my IFS from Control Freak will work with the QA1 upper & lower Control Arms. The control Freak Upper & lower CA's use a MOOG 5485 Ball joint know as the problem solver. QA1 says  MOOG 772 is the correct ball joint for their system.

[Mike DC]

 
The lower balljoint & steering arm are a combined piece on the Charger spindle.  Different design. 

[HPP]

The uppers are fine. Many places use the mopar ball joint in upper arms because of its durability and wide range of motion.

Like Mike Dc says, the bottom ball joints/steering arms are significantly different and the designed mounting of the M2 spindle will not allow a direct swap with a mopar spindle.

[RIDELIKEHELL]

I see what your saying thx gents! Next question is will my SSBC Brakes work on a Mopar Spindle

[RIDELIKEHELL]

answer is NO ...anyway thx again