Does anyone know what this clip is?

[pullrock]

Hi All,

I blow my engine bay apart to repaint it and clean up some wiring under the hood.  I felt like I did a good job bagging and tagging everything.  I have one clip that I missed to bagged.  Anyone know what it is and where it goes?

Thanks,

Eric

[John_Kunkel]

That clip is for the 4-speed wiring that goes to the BU light switch; usually mounted on the top rear side cover bolt and the rear bolt right below it.

[pullrock]

My car is automatic and your diagram show that wire going on the passenger side.  That wire goes to the starter relay on the drivers side firewall.  Am i missing something? 

Eric

[gtx6970]

 Looks more like the clip that goes on the back of the alternator.  The one for the 4 spd backup lamp wiring has a much larger hole in it

Assuming this is for a B body



"AX41" - Wire Retaining Clip for the Alternator - $7 Each

Wire retaining clip for the washer pump and horn wires or positive alternator lead on the rear of the alternator.   Zinc plated correct gauge steel and thermo-plastic coated for proper appearance.  Comes complete with retaining screw.

[Kern Dog]

THose diagrams are not from a right side perspective, they are left/drivers side.

[Dodge Don]

Agree. Alternator wiring clip.

Looks more like the clip that goes on the back of the alternator.  The one for the 4 spd backup lamp wiring has a much larger hole in it

Assuming this is for a B body



"AX41" - Wire Retaining Clip for the Alternator - $7 Each

Wire retaining clip for the washer pump and horn wires or positive alternator lead on the rear of the alternator.   Zinc plated correct gauge steel and thermo-plastic coated for proper appearance.  Comes complete with retaining screw.

[pullrock]

Thanks for all your replies.  Yes, that one on the alternator sees to be bigger and my car has a one wire alternator.  It for sure didn't come off that, we removed it from around the drivers side down by the master cylinder brake lines.  I will keep looking and hopes to find it location. 

Thanks again,

Eric

[gtx6970]

Thanks for all your replies.  Yes, that one on the alternator sees to be bigger and my car has a one wire alternator.  It for sure didn't come off that, we removed it from around the drivers side down by the master cylinder brake lines.  I will keep looking and hopes to find it location. 

Thanks again,

Eric

That type clip is not used on a B body.
it IS used on A bodies though