News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Speedo Cable holder? Welded to the floor?

Started by challenger70, September 02, 2016, 10:59:18 AM

Previous topic - Next topic

70 sublime

Not sure what car and year you are working on
Did you get the square box looking part that welds on to hold the parking brake cable also ?

next project 70 Charger FJ5 green

Dino

Extraordinary claims require extraordinary evidence.

challenger70

Quote from: 70 sublime on September 02, 2016, 12:21:16 PM
Not sure what car and year you are working on
Did you get the square box looking part that welds on to hold the parking brake cable also ?



My bad... '68 Charger, 4 speed if that matters.  I had him look specifically if they had replaced the parking brake bracket and told him to let me know if I was missing anything which brought up this speedo cable holder.
'68 383 A833 QQ1 Charger
'70  440 727 FY1 Challenger

VegasCharger

Quote from: challenger70 on September 02, 2016, 12:39:10 PM
My bad... '68 Charger, 4 speed if that matters.  I had him look specifically if they had replaced the parking brake bracket and told him to let me know if I was missing anything which brought up this speedo cable holder.

I have a driver side inner fender brake line/speedo cable holder bracket if you need one.

:cheers:

69bfan

We have reproduced the bracket that is welded to the bottom of the floor pan.  They are used to hold the speedometer cable up close to the floor pan.  If you have not been able to find one yet, drop me a message.
Richard O'Shields
Restoration Parts and Materials
404-643-5760
r.l.oshields@att.net
Restoration Parts and Materials
Weatherstripping is our specialty, but we stock a wide assortment of restoration needs.
www.restorationpartsandmaterials.com