72 Plymouth Satellite Heater Control Cable Hookup

[gibber]

I neglected to take pics of how this heater valve control cable attaches to the valve and the temp control slider under the dash. Figured it is the same as 71-74 Charger, hoping so anyways! Any pics greatly appreciated...

Thanks,

Mark

[Nacho-RT74]

Pretty sure I have pics on my PC...will check later

In advance, the heater valve end wire holder is available repro... Somewhere ( can recall where )

Now about the control end... Never have seen available the clip ( found one some years ago, used ), BUT my car had when I got it a speed nut attached to lever to keep the wire in place.

Both ends get the wire cover holder. i can't see yours.

[Nacho-RT74]

Ok... heater valve end:

[Nacho-RT74]

found a better view, Backelite heater valve, but attachs the same, using same clip ( the cover wire retainer is the correct one... mine got broken once and used a screw to clamp it when I took the pic )

[Nacho-RT74]

the round clip:

http://www.ebay.com/itm/1964-1978-Mopar-All-Heater-A-C-Control-Cable-Clip-NEW-OEM-NOS-ES-6028590-/301581456887?hash=item4637a7d5f7:g:H6MAAOSw-7RVHA14&vxp=mtr

[Nacho-RT74]

Couldn't fid the pic of the correct clip on heater-A/C control assebly, but this was on my car for long time ago and works... a speed nut... insert and twist

Sorry, OOOOOLD PICS took with an OOOOLD Nokia 6275

[Nacho-RT74]

found the correct clip for the control unit end on my parts stash box ( well one of them... was accidentally )