1970 Dodge Charger Help!!

[bigdsul]

Post a picture of the fender tag. The fender tag will contain all the build information about the car.

[BIGBLCK11]

Early run 70's had 69 tail lights.  Not being an XH, it should have holes or filled holes for a finish panel. Unless, it could be ordered without?  Or the tail panel was replaced. 

[JR]

Oh, and the position of the inside door locks indicate those are definitely 69-70 model doors.

The outside door handles are custom. From something else. Those doors maybe original to the shell.

If the radiator numbers match the vin, I'd bet money that's the 70 valence with the reverse lamp holes filled and shaved. Should be easy to feel/look behind it and see.

Does this car run and drive? It should be priced on the cheaper end of the spectrum if you're considering buying it.

Oh, and I'm fairly sure all 70s have the weld nut in the roof for the three point belts.

[70 sublime]

Looks like a 73 Charger console and 73 door handles

In the car is the key in the steering column or the dash ?

[GreenMachine]

 

It looks like 71-74 B-body console, door handles, and side mirrors. The back seat is a '70 based on the pattern (at least the backrest portion is), and the door panel is a '70SE. Front seat looks 1966-67 A or B body.

[VegasCharger]

Looks like a 73 Charger console and 73 door handles

It looks like 71-74 B-body console, door handles, and side mirrors. The back seat is a '70 based on the pattern (at least the backrest portion is), and the door panel is a '70SE. Front seat looks 1966-67 A or B body.

Just to confirm things these are 1971-74 B Body door handles. 

Not custom, not looks like but definitely are. 

[dual fours]

If your interested, this 'Subject' is flowing over to here.   http://www.dodgecharger.com/forum/index.php/topic,125302.0.html