News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

70 Hood Turn Signal Light Disassembly

Started by Davtona, July 31, 2016, 06:49:48 PM

Previous topic - Next topic

Davtona

I've been trying to disassemble a 70 Charger hood turn signal indicator light. This is a used original unit in fair shape. I'm trying to unscrew the wiring nut from the threaded boss on the plastic indicator as if I was going to change the bulb. I have been spraying it with a penetrant but no luck so far. Obviously I cannot apply any heat as it will melt the plastic lens. I hesitate to use a pliers to try to loosen for fear of breaking the plastic around the threaded boss. So I have been applying finger pressure only. Anybody been down this road before and have any suggestions?  :shruggy:  My next step may be to soak the entire unit in a penetrant.  


Whoops wrong section Moderator please move!!