News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

68 Charger tail panel upper trim screws

Started by 68RT440, July 24, 2016, 05:52:12 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

68RT440

July 24, 2016, 05:52:12 PM
Hey guys, does anyone know what the correct screws are that hold the top stainless trim piece in place on a '68 Charger tail panel? Mine had some hardware store screws holding it on that were all different from each other. Thanks!
1968 Charger R/T, matching numbers 440/727, black with green top and interior, currently getting restored by me

cdr

#1
July 24, 2016, 07:46:03 PM
Mine had & has the same as the wheel well trim screws, they have bee's wax on the threads.
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

68RT440

#2
July 24, 2016, 08:27:16 PM
Awesome, thank you!
1968 Charger R/T, matching numbers 440/727, black with green top and interior, currently getting restored by me
Print
Go Up Pages1
User actions