Need help identifying correct brake distribution block

[funknut]

While I'm installing 4-wheel disc brakes in my '68 Charger I was going to replace the front brake lines.  I have a Wilwood M/C and prop. valve and ordered this set of lines:

http://www.getdiscbrakes.com/rkt6806

So that should be everything I need to get to the distribution block below the M/C.  I've now found that all the fittings on the distribution block are rusted solid, so I'm trying to figure out the right replacement.  I'm not so concerned about it being 100% correct for the year, just looking for the right part to get me going (er, stopping) again.

I found this pic in another thread and it looks like what I'd need:



And the closest thing I can find is this:

http://www.manciniracing.com/intudibl5.html



Can someone confirm if this part will work for my application?

Thanks!

[BLK 68 R/T]

Here are the 2 valves for a disc brake car as pictured in your first post.
Distribution/Proportioning valve
http://www.classicindustries.com/product/mopar/parts/md2267.html
Rear brake proportioning valve
http://www.classicindustries.com/product/mopar/parts/md2274.html

[b5blue]

I chopped the lines and pulled the dist block. Cut the tubes off at the hex and used a 6 point socket to remove the steel nut from the brass block. Worked, steel cant rust to brass.

[funknut]

Here are the 2 valves for a disc brake car as pictured in your first post.
Distribution/Proportioning valve
http://www.classicindustries.com/product/mopar/parts/md2267.html
Rear brake proportioning valve
http://www.classicindustries.com/product/mopar/parts/md2274.html

Thanks! That first one looks similar to the Mancini unit but appears to be a bit wider in the middle.  I'll see if I can find out if there are any differences.

[funknut]

I chopped the lines and pulled the dist block. Cut the tubes off at the hex and used a 6 point socket to remove the steel nut from the brass block. Worked, steel cant rust to brass.

Nice, I'll give that a shot for sure.  I may have stripped one pretty good, though. 

[b5blue]

Vice grip it