decal removal

[boss429kiwi]

Hi

Has anyone tried to remove the front nose cone decals, from good paint?
Any hints and suggestions.

Gary

[1RareBird]

Medium heat from heat gun slightly ahead of where you're pulling up from, don't get too close and try move from one end to the other. In addition there is an eraser (3M) that works off a drill and will remove the decal without harming the paint. Either method works, good luck.

[Aero426]

Heat gun for the large decals will do the trick.   

[boss429kiwi]

Great, thanks.

[Brock Lee]

Medium heat from heat gun slightly ahead of where you're pulling up from, don't get too close and try move from one end to the other. In addition there is an eraser (3M) that works off a drill and will remove the decal without harming the paint. Either method works, good luck.

Those eraser wheels are bad ass! They work great! I particularly find them the best solution for old vinyl that has become brittle and wants to come off in tiny pieces. But they will cut through any vinyl.

I will only add that I prefer them in a high speed tool..

[Aero426]

Eraser wheel works great for smaller decals.       The nose decals should peel off with some indirect heat very easy.   

[odcics2]

Easier to own a Daytona!   

[A12 Superbee]

You need a caramel wheel, they work great, not sure if its called the same thing over there tho as here in Australia.