Flywheel question

[comet_666]

My old flywheel is a 6 bolt, need a 8 bolt one for my eagle crank so I can get it on the dyno.
Is there a specific bolt pattern or anything I need?

[charger1972]

When I ordered mine , I just ordered a Mopar one for eight bolt crank . Just make sure to get one for the size clutch and bell / scatter shield you are using . I had an 11 inch clutch set up , I believe 143 tooth ring gear . Smaller one is 130 tooth .

[comet_666]

Its just foe dyno..I am mating it to a 727.
So these are pretty standard?

[charger1972]

I`m no expert , as this was my first stroker build .... but I think they are the same bolt pattern as a Hemi . This is the one I went with . http://www.summitracing.com/parts/ram-1593

[charger1972]

And bigger flywheel bolts , I found that out when I tried to bolt it on .

[comet_666]

I ordered this one

http://store.440source.com/Billet-Flywheel-8-Bolt/productinfo/113-1021/

I am also looking locally to borrow one so I can get this dyno'd before the weekend

[charger1972]

Wow ! Nice find , wish they had them when I put mine together .