R/T POSITION

[daveco]

" i don't think anyone is understanding what i need  daveco & igozumn has given me the right information but his stripe is incorrect   .what i indent to do is put a 70 stripe which has no R/T cut out then put the badges on top of the vinyl stripe but i need the measurement  as shown in my first post to make sure the badge falls in the correct location which is center of the vinyl stripe"


It's pretty clear what you want to do.
The only thing that would impact your plans would be a significant difference side to side in the front to rear location of the existing emblems. My best recollection, on the cars I have seen, is that the R/T emblems are more or less centered over the side marker. The stripe decals are available without the R/T cut into them. Should be relatively easy to center a solid (no R/T cutout) stripe decal over the existing emblem locations.

[ht4spd307]

this post is the reason why i ask the question as this member pushed the holes 1/4 " forward to get the badge center of the stripe so please keep the measurements coming as too many references don't hurt anyone       this is the link      http://www.dodgecharger.com/forum/index.php?topic=98582.0