Bee or Coronet trunk lid lip detail

[birdsandbees]

I know there are a few here with a 69 Bee. Could one of you be so kind as to take me a few pictures straight on at your trunk lip with it closed and open.. and with a 4 foot straight edge across it.

I supplied an untouched original lid, in place of my improperly repaired lid, and I need to make sure they duplicated the profile correctly. I think the folded lip was straight, but they say it was slightly V'd and of course the trimming is awol.

THANKS!

[birdsandbees]

Anybody???

[ws23rt]

This is a 69 coronet.  It is original and no metalwork has been done to it.
The trunk lid has a v shape to it on the lower lip.  The gap at the letter D is about 3/8"  measured with calipers on the straight edge.

BTW as you can see I need an RT emblem that fits the holes on the right.  Been looking off and on for years. These seem to be an odd one to find.

[birdsandbees]

THANK YOU VERY much !

Could you email me the full size pictures??? oifa @ irishfield.on.ca (remove the spaces)

Wayne

[birdsandbees]

Thanks again Bruce! Just what I needed to let things carry on, metal man had it correct!

[ws23rt]

Thanks again Bruce! Just what I needed to let things carry on, metal man had it correct!