News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Pushrod length

Started by C500, May 04, 2016, 08:58:07 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

C500

May 04, 2016, 08:58:07 PM
Guys, Can anyone post up the length of the pushrods for a '69 440 HP engine. Need to get some from Summit with a bunch of other things, but nothing listed for the car and heaps of length options available. 300lbs+ of spring pressure (thick walls needed) ... suggestions on part/brands welcome  :cheers:
"An aggressive exterior with power to match was enough to pull in the performance boys-especially when abetted by a pair of pipes blaring out the back, and brawny red-sidewall rubber hitting the pavement."  

"........the four speed box changes cogs with the precision of a sharp axe striking soft pine."

c00nhunterjoe

#1
May 04, 2016, 09:28:45 PM
9.315 should be stock, but if you have changed anything, you should measure before ordering.

C500

#2
May 04, 2016, 09:31:14 PM
Quote from: c00nhunterjoe on May 04, 2016, 09:28:45 PM
9.315 should be stock, but if you have changed anything, you should measure before ordering.

Ok, thanks... no block decking or head milling going on, but will measure to make sure  :2thumbs:
"An aggressive exterior with power to match was enough to pull in the performance boys-especially when abetted by a pair of pipes blaring out the back, and brawny red-sidewall rubber hitting the pavement."  

"........the four speed box changes cogs with the precision of a sharp axe striking soft pine."
Print
Go Up Pages1
User actions