73 Charcoal canister to 1406 Edelbrock

[Alan73Charger]

So I've been reading up on this and I'm still a bit confused as to the best way to do it. 

1. The fuel tank line will stay connected to the 1/4 inch metal line coming up from gas tank.

2. The purge line can run to the drivers side manifold vacuum or i guess to any manifold vacuum source. I'll be using the left side ported vacuum for the distributor.

3. Most confusing is the carb bowl line since the 1406 doesn't have a connection for it. Just cap it off?

Any comments and suggestions greatly appreciated!

[John_Kunkel]

Yep, just cap off the nipple on the canister.

[Alan73Charger]

Yep, just cap off the nipple on the canister.

Thanks a bunch John, I thought I had it right!