News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Daytona/500 A pillar molding

Started by panhead, April 14, 2016, 06:50:15 PM

Previous topic - Next topic
Print
Go Down Pages 1 2 All
User actions

panhead

#25
May 01, 2016, 05:39:24 PM
And the last three for now.

69' Dodge Charger 500
69' Dodge Daytona "Replica"

Hemi Runner

#26
May 01, 2016, 08:10:59 PM
Some of the low grade 304 stainles will be magnetic.

C500

#27
May 01, 2016, 08:38:16 PM
Quote from: daytonalo on May 01, 2016, 09:03:37 AM
As always amazing work mike!! I wouldn't know where to start on that part !
Thanks for the plug guys  !
I still make to order Mirror polished stainless steel A-pillar trim  for DAYTONA/ 500/ SUPERBIRD . I have been doing it for over ten years and average sales of one set a month worldwide and my trims have been on a  Grave Yard cars .
From time to time I offer Die bent Daytona trunk hinges as well , may have a set left .
I take great pride in everything I do and I'm extremely fussy and wont settle for anything less than perfection . I have tweaked the design over the years to as close in appearance to original but improved installation and fit as compared to the original . The last batch of Mirror stainless has been .034 very difficult ( usually .030 ) cant complain all my stainless is free , a buddy runs a major local Mil-Spec sheet metal machine shop  

Also manufacturing Nomad stainless headliner bow set , 749.00 set

If anyone here wants a set I will do 399.00shipped lower 48 , checks are fine , please call first
609-315 -two six four zero

Larry      

:2thumbs: keep up the good work, If I didn't have an original set of A pillar trims on my 500, I would have no hesitation putting a pair of yours on
"An aggressive exterior with power to match was enough to pull in the performance boys-especially when abetted by a pair of pipes blaring out the back, and brawny red-sidewall rubber hitting the pavement."  

"........the four speed box changes cogs with the precision of a sharp axe striking soft pine."

wingcarenvy

#28
May 05, 2016, 10:27:07 AM
Man there is some real killer metal fab stuff here. Just a thought though, I know stainless is correct (403 is magnetic BTW)but what about doing mild steel and having it chromed? I know I would rather have stainless on an original car but a clone I think I would rather have a chrome plated one. Just a thought.

DAY CLONA

#29
May 05, 2016, 11:16:30 AM
Quote from: wingcarenvy on May 05, 2016, 10:27:07 AM
Man there is some real killer metal fab stuff here. Just a thought though, I know stainless is correct (403 is magnetic BTW)but what about doing mild steel and having it chromed? I know I would rather have stainless on an original car but a clone I think I would rather have a chrome plated one. Just a thought.




You could just have the stainless chromed...if you desire chrome

panhead

#30
May 06, 2016, 08:38:48 AM
 I've got a single polish on them and they don't look to bad, I'll get the last of the polishing done and then I can check that item off the list. 
:yesnod:  Thanks for all the help and guidance.

Curt 
69' Dodge Charger 500
69' Dodge Daytona "Replica"

panhead

#31
May 06, 2016, 08:39:42 AM
and some more
69' Dodge Charger 500
69' Dodge Daytona "Replica"

WINGMAN

#32
May 06, 2016, 10:25:08 AM
  Can I put a order in  :drool5: (Wingman)  JR.
69 Daytona XX29L9B409032 , 02 Ram Cummins,

Hemi Runner

#33
May 06, 2016, 08:55:46 PM
Quote from: WINGMAN on May 06, 2016, 10:25:08 AM
  Can I put a order in  :drool5: (Wingman)  JR.
Lol, I offered to buy his steel ones as I'm going to powdercoat mine body color but I didn't get the impression he was interested.
Print
Go Up Pages 1 2 All
User actions