Glove box door hinge screws

[Voss]

Geting into details on the interior on my -68 Charger... What would be the correct screws for the glove box door hinge? I have different types for all of them, would look nice to get it right.

[birdsandbees]

That hold the door to the hinge.. or the hinge to the box/dash frame?

68 lifts up like a 69?.. and not drop down like a 70?

[Voss]

That hold the door to the hinge.. or the hinge to the box/dash frame?

68 lifts up like a 69?.. and not drop down like a 70?

Good point, my question is for the hinge to the box/dash frame... And yes, it lifts up!

[birdsandbees]

Pretty sure every screw is the same. Frame to cardboard and frame to hinge right beside those. I'll go check, I just took mine apart last week. Like a 1/2" silver cad screw. I'll grab a picture...

[Voss]

Pretty sure every screw is the same. Frame to cardboard and frame to hinge right beside those. I'll go check, I just took mine apart last week. Like a 1/2" silver cad screw. I'll grab a picture...

Would be great, thanks!

[birdsandbees]

Frame to cardboard and frame to hinge screws are silver cad and 1/2" long from under head to tip.

Hinge to door screws are black with a star washer under the head and are 5/8" long.

I know these are original installation on my 69 'Bee.

[4406pack]

Are the screws for the door to the frame #8 or #10 it's for my 70 r/t?

[khojnacki]

Interesting. I just started dismantling my dash and the glove box had both silver and black screws, side by side.