News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

8 3/4 wheel studs

Started by 68 charger freak, December 21, 2016, 04:35:30 PM

Previous topic - Next topic

68 charger freak

 has anyone had problems with there wheel studs being to short when trying to mount aftermarket wheels? I'm having a problem locating longer wheel studs that have the correct knurl size for my 8 3/4 rear end. i can find longer studs but with the wrong knurl sizes, I was hoping not to have to drill out the holes in the axel .does anyone know of a source for the studs?
68 charger, pro touring build ,mini tub,528 wedge,magnum-xl 6 speed,rms alterkation,martz 4 link,moser 8.75,custom interior

green69rt

You might call this guy.  He does a lot of suspension/brake sales and may have a source.

http://www.doctordiff.com/

John_Kunkel


If the wheels have conical seats, no need to change to longer studs, just get some extended lug nuts.
Pardon me but my karma just ran over your dogma.

68ChargerJMP

Moser sells .625 knurl studs.

Chargen69

switched mine over to all right hand thread, from advance auto

Windsor

https://m.summitracing.com/parts/arp-100-7705
I went with these. Had to run them up to the machine shop and use the press to get them seated all the way. What under head length are you looking for?

68 charger freak

68 charger, pro touring build ,mini tub,528 wedge,magnum-xl 6 speed,rms alterkation,martz 4 link,moser 8.75,custom interior