starter

[Sgtmajor]

How do you change the starter on a 1974 dodge charger 400 2 barrel carb

[A383Wing]

disconnect battery, jack up car, place jack stands under car, remove the 2 battery & solenoid wires to starter, remove the 2 bolts or nuts that hold starter to bellhousing......reverse procedure to install

a service manual will have this info in it

[Sgtmajor]

Sorry let me rephrase that how do I get to the top bolt on the starter. It seems no direct way to that bolt without removing other parts.

[John_Kunkel]

A 5/8" socket on a long extension is the easiest way to get the top bolt; it's a little off of a direct shot but the socket will fit the bolt well enough to loosen it or if you're patient enough, a starter wrench.

[birdsandbees]

A "wobble" extension at that! 

[A383Wing]

A box wrench fits mine without any problem, no need to remove other parts

[myk]

A 5/8" socket on a long extension is the easiest way to get the top bolt; it's a little off of a direct shot but the socket will fit the bolt well enough to loosen it or if you're patient enough, a starter wrench.

I have never seen that before.   Thanks for sharing....

[VegasCharger]

A "wobble" extension at that! 

Yep, long extension with wobble drive. And with wobble drive, preferably used a 6 point socket.

[Mopar Nut]

A "wobble" extension at that! 

Yep, long extension with wobble drive. And with wobble drive, preferably used a 6 point socket.

x3