Hood turn signal housings - 3D Printed w LED's (1968-1969)

[ZappBrannigan]

I recently decided to make my hood turn signals functional.
My 69 Charger never came with them and I bought the lenses a couple years ago to fill in the openings.

My car is a driver so I prefer functionality over authenticity.

I went online and they are like $230 US (about $350 Canadian) which I would rather spend on beer and gas.
So I decided to draw them up in Solidworks and 3D print them.
total Cost was about $20 and they work great and will never burn out. (40,000 hr LED's)

Thought I'd share if anyone else wanted to do the same.
https://www.shapeways.com/product/6UKGTNG4B/1968-1969-dodge-charger-hood-turn-signal-led-housi?li=search-results-4&optionId=59448217



shown assembled with Clear orange Lens (not included ,purchased separately)


I bought my LED strip here.
http://www.gearbest.com/led-strips/pp_218601.html

[Charger4404spd]

Very nice and saved a bunch of money

[Mopar Nut]

Any pictures of them mounted on your car lite up?

[TexasStroker]

Nice!

I'd also like to see them installed and actuated.  Looks like a great set up!

[garner7555]

I would also like a little more description of what is included if I order some of these.   Thanks.     

[ZappBrannigan]

Thanks guys,

To answer whats involved in setting it up and what you get if you order the 3d print.
Its not plug and play but its not difficult either.

1.The order comes as a one piece assembly in color of your choice which you split into 2 separate housings.
(original design was 2 separate parts but shapeways charges a handling/cleaning fee per part so I attached them)

2. Cut the LED strip and solder on your 2 wires (LED strips are labelled where to cut and they are 12v with resistor built-in)
I suggest getting the 5m roll of LED but PM me if you want me to mail you some strips.
http://www.gearbest.com/led-strips/pp_218601.html

3. Test with a 12V battery, Take off the sticker back of the LED tape and insert into the housing.

4. Attach to Clear orange Lens using clear silicone. Seal up the insert opening with urethane or Silicone. let it cure for 8-24hrs

5. add crimp connectors and run your wiring harness

I'll get some pictures tonight of it lit up.

[ZappBrannigan]

Here are the pictures I took in well-lit garage.

From inside car.


From hood.





Some build pictures.

[garner7555]

Ok awesome!  Great idea and design.  Is the part surrounding the clear lens grey on all of them or is it the color of the housing?  Thanks


Edit: I was able to figure out some of my questions by looking close at the links.  Lens are not included.  I ordered the housings and the LEDs that you suggested.  Thanks.

[Mopar Nut]

They look awesome!

[ZappBrannigan]

Thanks I think they look great too and they are bright.

Just to clarify.
The 3D print is only the 2 housings in the image below. NO LED's or Clear orange Lens.
I bought my lenses online (about $40) a couple years ago and I believe the R/T is orange with Black paint and the SE is just clear orange.

I do not manufacture these. Shapeways is a 3d print sharing service where others can log in and purchase/print what you created.
In my case I get a $3 Credit when someone orders them. I use this credit to help pay for future prototypes and development.

[lukedukem]

the LED link you posted says out of stock. is there another color you can run. i have my housings and lens, but was wanting to try to do the LED mod to it.

Luke

[ZappBrannigan]

"the LED link you posted says out of stock. is there another color you can run. i have my housings and lens, but was wanting to try to do the LED mod to it. "

Luke,
Yes it does seem to be out of stock. although you can change the color to white instead of warm white and they have them.
PM me with a mailing address and I will mail you 3 strips. (1 extra if you mess up soldering)

Also be careful with original housing as its metal and you can short/ground on it. make sure to insulate the LED and wiring or coat/paint the inside of the housing with insulator like clear silicone.

Happy green beer day.

[miller time]

My hero! Just ordered mine, now I need to get lenses, there was no way I could afford the reproduced one

[garner7555]

Just received mine last week.            Look good but it will be a long while before I test them, my car is in 1000 pieces.   

[miller time]

Just got an email saying they won't manufacture the housings for me because the design is now apparently too fragile and I've already ordered the LED lights  please ask if they can do the orange or white without canceling, atleast I didn't order the lenses and I find something else for the LEDs, ohhh I need console lights and I can make this work   still sad about the hood indicators though they looked sweet

[ZappBrannigan]

I had to update the model. they didn't like how thin the connection between the 2 pieces were. (connections are cut away anyways)
I updated the original and added individual ones so you don't have to cut them. (but you need to order 2 pieces)

https://www.shapeways.com/product/PR8U3QUWQ/68-69-charger-hood-turn-signal-led-housing-single?

Having issues with the link preview but it can still be ordered.
I updated the link to go to the BETA version. scroll to the last picture and see the 3D view.

[miller time]

Link doesn't lead to anything it says oops
and I clicked the designer profile and it only shows the one that they won't make, also their search is useless 

[ZappBrannigan]

Its up and available again. Shapeways customer service claimed It was a bug in their site.
I blame the North Koreans...and global warming.

[Just 6T9 CHGR]

Very cool idea!  FWIW the lenses originally were trimmed in black on all models (non-R/T & R/T)

[miller time]

So far no email telling me it's cancelled
My Hero! (Hopefully)

[igozumn]

Just ordered 2 sets.  Cool stuff.  Zapp, I sent an IM.  Let me know if you didn't get it.

Chris

[garner7555]

Anyone get these installed?  Mine are still in the box waiting for me to get the car assembled.

[Derwud]

Can you make some for the 70 now...

[lukedukem]

Do you have a pic of where you tie in at. The connector?

Luke

[garner7555]

I ordered a roll of the LEDs that you listed and they never came, so I reached out to customer service at Gearbest and didn't even get a reply.  So I thought I would just reorder but now they are sold out of both colors.  Does anyone know where I can buy these LEDs at?