Belt setup Chrysler 440

[Shlep 68]

Hello I have Chrysler 440 with ac and I am wondering how my belts line up as I have a two groove alternator 4 groove crank pulley one groove on the fan and an idler pulley I can't find a pic like my motor thx

[Shlep 68]

1969

[Charger_Fan]

I don't have a pic for you, but you shouldn't need one really. Just eyeball from the side, along the pulley grooves.
Just make sure you get a matched set of belts for the A/C, so you don't have one squealing.

[Shlep 68]

I think I have it routed correctly but I have two belts for air compressor can I just use one belt being in not using the air just the pulley thx again

[crj1968]

it should be the back two grooves on the crank for the A/C belts and they go to the alternator as well.
next forward PS
front groove fan and idler, I think.......one momento...

Like this?

[Just 6T9 CHGR]

 

[Charger_Fan]

I think I have it routed correctly but I have two belts for air compressor can I just use one belt being in not using the air just the pulley thx again

Yes, if your A/C compressor is just along for the ride, you could use one belt. The reason it uses two is because the compressor uses a lot of power to turn it & it makes a single belt slip and squeal.

[Shlep 68]

Thank you

[John_Kunkel]

And a single belts saves the hassle of trying to find two matched belts.