News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Got the engine and trans. Part III...

Started by NorwayCharger, April 10, 2006, 12:38:51 PM

Previous topic - Next topic

NorwayCharger

Quote from: autodynamics on October 16, 2006, 01:52:10 PM
HEY NORWAY I JUST PUT THESE IN AGAIN, WHAT DO YOU THINK?


Are those H4 bulbs, looks like the light up well ;), you are not wiring thru your light switch but relays ;D

And i realy digg your car ;D ;D 
AKA the drummer boy
http://www.pink-division.com

autodynamics

THERE ARE A BULB AND BALLAST KIT. AND THERE ARE RELAYS DO YOU WANT PICS?

chargerrt

Norway I love your car.  Words cannot describe how amazed I am every time I look at this car.  I want to do mine like yours when I'm out of school and settled down some.  I love the mix of old and new

NorwayCharger

Quote from: autodynamics on October 16, 2006, 02:27:55 PM
THERE ARE A BULB AND BALLAST KIT. AND THERE ARE RELAYS DO YOU WANT PICS?

I beleve you ;), but i would like to see a pic..
AKA the drummer boy
http://www.pink-division.com

NorwayCharger

Quote from: chargerrt on October 16, 2006, 04:03:18 PM
Norway I love your car.  Words cannot describe how amazed I am every time I look at this car.  I want to do mine like yours when I'm out of school and settled down some.  I love the mix of old and new

Thanks, me too is a fan of mixing old and new stuff.
AKA the drummer boy
http://www.pink-division.com

Just 6T9 CHGR

Simply bad ass   :bow:



.....Bill you taking notes?
Chris' '69 Charger R/T


chargerrt

Hey Arne,
I saw that you were having a tought time deciding on what exhaust tips to use.  You might like the ones I have.  They are similar to the original but you can definately tell a difference.  They are kind of a squared oval look.  The brand is Megs and I got them from Jegs.  Jegs part # 250-5290C.  Here's a link to the site...maybe it'll work.

http://www.jegs.com/webapp/wcs/stores/servlet/CategoryDisplay?storeId=10001&catalogId=10002&catalogIdentifier=Jegs_Direct&categoryId=16963&parentCategoryId=10255

Chad

bill440rt

Quote from: Just 6T9_CHGR.... on October 16, 2006, 06:25:11 PM
Simply bad ass   :bow:



.....Bill you taking notes?

Chris, I'm running out of pages!!  :drool5: :scope:
Norway, your Charger is summed up in 2 words: Bad Ass!!  :METAL:
I may be sending you a few PM's with questions, hope you don't mind!
"Strive for perfection in everything. Take the best that exists and make it better. If it doesn't exist, create it. Accept nothing nearly right or good enough." Sir Henry Rolls Royce

NorwayCharger

Quote from: bill440rt on October 16, 2006, 09:38:47 PM
Quote from: Just 6T9_CHGR.... on October 16, 2006, 06:25:11 PM
Simply bad ass   :bow:



.....Bill you taking notes?

Chris, I'm running out of pages!!  :drool5: :scope:
Norway, your Charger is summed up in 2 words: Bad Ass!!  :METAL:
I may be sending you a few PM's with questions, hope you don't mind!

No Problem..
AKA the drummer boy
http://www.pink-division.com

dads_69

I shaved my door handles as well. What kit did you use to have open your doors? I used Jaguar and Cadillac parts to have my car work like stock/modified.
Awesome job by the way...........
Mark
Hey, you can hate the game but don't hate the player.

NorwayCharger

Quote from: dads_69 on October 17, 2006, 01:57:21 AM
I shaved my fdoor handles as well. What kit did you use to have open your doors? I used Jaguar and Caddilac parts to have my car work like stock/moddified.
Awesome job by the way...........
Mark

Thanks.
I used this kit http://www.a1electric.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=AEOS&Product_Code=POP-R2
I did not use poppers of any kind, the doors pop out fine with new rubbers and hinges.
AKA the drummer boy
http://www.pink-division.com

Arthu®

Quote from: NorwayCharger on October 17, 2006, 10:40:47 AM
Quote from: dads_69 on October 17, 2006, 01:57:21 AM
I shaved my fdoor handles as well. What kit did you use to have open your doors? I used Jaguar and Caddilac parts to have my car work like stock/moddified.
Awesome job by the way...........
Mark

Thanks.
I used this kit http://www.a1electric.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=AEOS&Product_Code=POP-R2
I did not use poppers of any kind, the doors pop out fine with new rubbers and hinges.

Whenever I build a car like that (will likely be a couple of years) I would love shaved door handles, my only problem is though that I think the little key boxes are just too damn ugly. It just looks too cheap. How about something slicker with some alloy tints which is actually a little heavier duty than the cheap plastic ones. I know I would pay for it.

Arthur
Striving for world domination since 1986

Rolling_Thunder

is that a custom made center console ?   or is it out of something ?
1968 Dodge Charger - 6.1L Hemi / 6-speed / 3.55 Sure Grip

2013 Dodge Challenger R/T - 5.7L Hemi / 6-speed / 3.73 Limited Slip

1964 Dodge Polara 500 - 440 / 4-speed / 3.91 Sure Grip

1973 Dodge Challenger Rallye - 340 / A-518 / 3.23 Sure Grip

NorwayCharger

Quote from: Rolling_Thunder on October 17, 2006, 07:27:54 PM
is that a custom made center console ?   or is it out of something ?

It is made of a B&M Hammer and a Toyota Corolla console that is welded together..
AKA the drummer boy
http://www.pink-division.com

NorwayCharger

I´ve been busy helping a friend of mine build a 69 Dart GTS, but i have done my bumpers.
They are fiberglass bumpers that i have painted with Alsa Mirra Chrome.
Did lay a couple of black candy coats on top of the chrome to get the black chrome look.

Here are some pic´s
AKA the drummer boy
http://www.pink-division.com

autodynamics

as always very nice........how are you gonna brace them?

Silver R/T

Quote from: autodynamics on October 16, 2006, 01:52:10 PM
HEY NORWAY I JUST PUT THESE IN AGAIN, WHAT DO YOU THINK?

what kind of light setup is that?
http://www.cardomain.com/id/mitmaks

1968 silver/black/red striped R/T
My Charger is hybrid, it runs on gas and on tears of ricers
2001 Ram 2500 CTD
1993 Mazda MX-3 GS SE
1995 Ford Cobra SVT#2722

Ryan

wow, I want to see those bumpers installed. Those look nice!


Also what brand and model are those seats?
69 charger r/t Triple Black
   572 HEMI, Passion 5 speed, 4.10 Dana under construction

2014 viper TA

ChargerHound69

The charger is looking good Norway.  Any clue's on when it will be done??


THE CHARGER PUNK

Again sweet car dude, cant wait 2 see that beast on tha streetz, u say ur gonna add a red stripe? personally all silver would look best as it does now, also thats a sweet custom hood u got 4 it-MATT

NorwayCharger

Quote from: autodynamics on December 08, 2006, 05:27:46 PM
as always very nice........how are you gonna brace them?

Thanks.
I gonna weld bolts in to some steel plates, and glue/mould them to the back of the bumpers.
AKA the drummer boy
http://www.pink-division.com

NorwayCharger

Quote from: Ryan on December 08, 2006, 08:57:14 PM
wow, I want to see those bumpers installed. Those look nice![/color]

Also what brand and model are those seats?

Those are Summit brand seats.

The charger is looking good Norway.  Any clue's on when it will be done??

It will be done april/may.
AKA the drummer boy
http://www.pink-division.com

autodynamics

very nice norway.... cant wait till its done.....

Ryan

really, those are summit seats :o wow those look really nice.
69 charger r/t Triple Black
   572 HEMI, Passion 5 speed, 4.10 Dana under construction

2014 viper TA

NorwayCharger

Hi.
Got the hood and bumpers mounted.
Here are some pic´s
AKA the drummer boy
http://www.pink-division.com