Quarter glass rubber stops

[Dino]

On a 2nd gen each quarter panel has two metal stops that stop the large bracket holding the glass going up. They are mounted high on the inner panel.

Each has a rubber band around them. Mine are either worn or missing. Does anyone sell these?

[72Charger72]

Wondering same thing as I found one missing on mine last weekend.

[HeavyFuel]

I used several thick rubber o-rings instead of the original rubber band, then dipped the o-rings in liquid rubber (plasti-dip) to eliminate any possibility of movement.  The area is concealed, so what the heck.

[Dino]

Cheater!

...okay I may have to do something like that.

[72Charger72]

found them this morning 5.00/ea
http://www.steelerubber.com/glass-up-stop-bumper-70-3623-62

[VegasCharger]

Heater hose is another trick you can do.

[rebby]

Heater hose is another trick you can do.

If I remember correctly, I used vacuum line. Same concept but then I didn't have to deal w/the cotton fibers that a lot of heater hoses have.

[b5blue]

For odd ball stuff like that I use "Sugru". It's like putty that hardens to rubber.
https://sugru.com

[CDN72SE]

found them this morning 5.00/ea
http://www.steelerubber.com/glass-up-stop-bumper-70-3623-62

Thanks for posting, need some of those as well.