News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

dual carb setup...

Started by 1974dodgecharger, February 08, 2016, 11:48:38 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

1974dodgecharger

February 08, 2016, 11:48:38 PM
I have a regulator with 5 ports one for input and 4 for output.  Is it better to feed each carb from a line from the a separate port or just feed the dual carbs from a single line?

cdr

#1
February 09, 2016, 09:38:54 AM
separate lines.
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

1974dodgecharger

#2
February 09, 2016, 08:45:25 PM
Quote from: cdr on February 09, 2016, 09:38:54 AM
separate lines.

cool....will do that.... :2thumbs:

dual fours

#3
February 09, 2016, 10:23:23 PM
Pipe in a fuel pressure gauge from one of the other ports.
1970 Dodge Charger SE, 383 Magnum, dual fours, Winter's shifter and racing transmission.

26 END
J25 L31 M21 M31 N85 R22
VX1 AO1 A31 A47 C16 C55
FK5 CRXA TX9 A15
E63 D32 XP29 NOG
Print
Go Up Pages1
User actions