Sorry, another 383 cam choice question

[Q5XX29]

Thanks, Ron! It runs very well. It still only wants to (willingly) pull to about 5600, but very strong throughout idle-5500-5600. No new converter yet. Going to do a front end suspension rebuild first. Always a "weakest link" to address, and for now that is what is bugging me most. Was just ordering that in fact- was going to go with a PST super kit, with rubber, and a GMAX 1 1/16 swaybar. Comments on those choices?

[firefighter3931]

Good to hear, Clint 

I'd say it's going to be done at 5800 rpm anyway based on the cam duration so no reason to over-rev it at this point. 

I did the front end on mine years ago with poly bushings but can't remember the company name. Happy with how nice and firm it feels. I used the stock swaybar as well and I'm sure the aftermarket stuff is better. These days the swaybar is mostly just hanging there.....loosened off for racing @ the track. 


Ron

[Q5XX29]

Good to hear, Clint 

I'd say it's going to be done at 5800 rpm anyway based on the cam duration so no reason to over-rev it at this point. 

I did the front end on mine years ago with poly bushings but can't remember the company name. Happy with how nice and firm it feels. I used the stock swaybar as well and I'm sure the aftermarket stuff is better. These days the swaybar is mostly just hanging there.....loosened off for racing @ the track. 



Ron

👍 Sounds good. Thanks !

[rt green]

clint, i did ck out hardees last sat nite. cool cars hot nite.  bruce

[Q5XX29]

clint, i did ck out hardees last sat nite. cool cars hot nite.  bruce

Sorry I missed you! I drove through briefly, but yes- too hot. Please try again when the conditions are better. You will be much more impressed with the turnout.