News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

anyone have an RMS Street Lynx rear suspension?

Started by 70Sbird, January 06, 2016, 11:02:25 PM

Previous topic - Next topic

70Sbird

Just wondering about these.
I've been looking through this section and going back over a year with no luck on any info. These look like a decent option for a "restomod" or driver car. has anyone ever had any experience with them?

http://www.reillymotorsports.com/streetlynx.shtml

Thanks
Scott

Scott Faulkner

keepat

I have installed the RMS street lynx system but have yet to get the car on the road.
Check the link below page 10.
Pat



http://www.dodgecharger.com/forum/index.php/topic,110212.225.html

HPP

They are a decent upgrade if you A) need quick adjustability in ride height B) need quick spring rate changes C) don't mind dealing with GM A body geometry issues.

Mike DC

                      
IMO you could probably do worse when it comes to aftermarket rear suspensions.

Aside from coilovers, the reduction in unsprung weight is probably the main upside to this one.  
 

I would stick with leaf springs until pretty far down the modification road.  Leafs get a bad rap from GM & Ford stuff.  Mopar's leaf setups were MUCH better.

70Sbird

Quote from: keepat on January 08, 2016, 10:37:36 PM
I have installed the RMS street lynx system but have yet to get the car on the road.
Check the link below page 10.
Pat



http://www.dodgecharger.com/forum/index.php/topic,110212.225.html

Thanks for the feedback. I love your Charger build !

Scott Faulkner

Patronus

Yes, installed it on a current E-body build.
I believe you are able to exchange springs at least once.
'73 Cuda 340 5spd RMS
'69 Charger 383 "Luci"
'08 CRF 450r
'12.5 450SX FE