News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

What would be a good gear for my car?

Started by keith88, December 19, 2015, 08:28:29 PM

Previous topic - Next topic
Print
Go Down Pages 1 2 All
User actions

keith88

#25
December 23, 2015, 08:05:57 AM
Quote from: Ghoste on December 20, 2015, 08:09:44 PM
What ratios can be had for the 8.25?
Quite a few i looked at summit racing,but i don't want any thing high than 3.55
1969 Charger  Orange /black top  (1989) 360 engine stock with added xtreme comp cam and a 4 bbl  , 904 trans/shift kit , 8-1/4 rear.. with general lee accents.

cdr

#26
December 23, 2015, 11:59:12 PM
keep the gear you have.
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

keith88

#27
December 24, 2015, 08:22:26 AM
I don't want a 2.76 gear at least not in a 318 car..big block maybe ,  but not in a 318 car.
1969 Charger  Orange /black top  (1989) 360 engine stock with added xtreme comp cam and a 4 bbl  , 904 trans/shift kit , 8-1/4 rear.. with general lee accents.

Ghoste

#28
December 24, 2015, 04:19:23 PM
100% and them some Keith.

keith88

#29
January 05, 2016, 07:19:51 PM
I bought a set of 3.55 they will be here tomorrow in a while ill buy the bearing kit to rebuild the rear and i should have them in in early Spring.
1969 Charger  Orange /black top  (1989) 360 engine stock with added xtreme comp cam and a 4 bbl  , 904 trans/shift kit , 8-1/4 rear.. with general lee accents.
Print
Go Up Pages 1 2 All
User actions